How Many Heating Methods Does The Planetary Cooking Mixing Machines Have?
Cooking Mixer News /
08/06/2021
How many heating methods does the planetary cooking mixing machines have?
The planetary cooking mixing machines is divided into steam type, gas type, gas heat conduction oil and electric heating heat conduction oil from the heating form.
Planetary cooking mixing machines output form: there are semi-automatic and fully automatic! The semi-automatic planetary cooking mixing machines uses a hand-operated turbine for discharging, and the automatic planetary cooking mixing machines is controlled by a button and hydraulically discharging!
Planetary cooking mixing machines stirring: special planetary stirring, stirring evenly, scraping the bottom thoroughly, to ensure that the pan is not sticky or sticky.
Planetary cooking mixing machines is used for automatic production line of beef sauce, braised chili sauce, hot pot base, sauce, mushroom sauce, curry chili sauce.
Self-turning planetary cooking mixing machines and tilting cooking mixing machines can stir and mix products such as stir-fry, stew, fillings and sauces.
The operation method of planetary cooking mixing machines equipment is as follows:
1. The inspector must repeatedly read the relevant standards and test procedures before operation.
2. After the preparatory work is in order, turn on the power first, observe and select the control state.
3. Carry out 1~2 trial runs before use, and keep the equipment in normal working condition.
4. Wipe the inner wall of the stirring pot and the stirring blade with a damp cloth.
5. In the order of first coarse and then fine, add the specified amount of graded standard sand into the sand adding tank.
6. Put the pre-weighed water and cement into the damp mixing pot in the order of adding water first and then adding cement. Take care not to spill the water and cement out of the pot, and then place it on the mixing stand and tighten it clockwise. Raise to the stirring position for stirring.
7. Start the switch and stir the mortar according to the following mixing procedure: first stir slowly for 30s, then slowly stir for 30s (add sand at the same time), then stir at high speed for 30s? Then pause for 90s (the operator can mix the blade and the pot wall within 15s The attachments on the upper part are cleaned to the middle of the pot), then high-speed stirring for 60s, the stirring is completed, the machine will stop automatically and enter the next program.
8. Clean the mixing pot, repeat the above 4~7 procedures, do the second mixing, until all the tests are completed.
9. Shut down, cut off power, and clean up the workplace.
The planetary cooking mixing machines is divided into steam type, gas type, gas heat conduction oil and electric heating heat conduction oil from the heating form.
Planetary cooking mixing machines output form: there are semi-automatic and fully automatic! The semi-automatic planetary cooking mixing machines uses a hand-operated turbine for discharging, and the automatic planetary cooking mixing machines is controlled by a button and hydraulically discharging!
Planetary cooking mixing machines stirring: special planetary stirring, stirring evenly, scraping the bottom thoroughly, to ensure that the pan is not sticky or sticky.
Planetary cooking mixing machines is used for automatic production line of beef sauce, braised chili sauce, hot pot base, sauce, mushroom sauce, curry chili sauce.
Self-turning planetary cooking mixing machines and tilting cooking mixing machines can stir and mix products such as stir-fry, stew, fillings and sauces.
The operation method of planetary cooking mixing machines equipment is as follows:
1. The inspector must repeatedly read the relevant standards and test procedures before operation.
2. After the preparatory work is in order, turn on the power first, observe and select the control state.
3. Carry out 1~2 trial runs before use, and keep the equipment in normal working condition.
4. Wipe the inner wall of the stirring pot and the stirring blade with a damp cloth.
5. In the order of first coarse and then fine, add the specified amount of graded standard sand into the sand adding tank.
6. Put the pre-weighed water and cement into the damp mixing pot in the order of adding water first and then adding cement. Take care not to spill the water and cement out of the pot, and then place it on the mixing stand and tighten it clockwise. Raise to the stirring position for stirring.
7. Start the switch and stir the mortar according to the following mixing procedure: first stir slowly for 30s, then slowly stir for 30s (add sand at the same time), then stir at high speed for 30s? Then pause for 90s (the operator can mix the blade and the pot wall within 15s The attachments on the upper part are cleaned to the middle of the pot), then high-speed stirring for 60s, the stirring is completed, the machine will stop automatically and enter the next program.
8. Clean the mixing pot, repeat the above 4~7 procedures, do the second mixing, until all the tests are completed.
9. Shut down, cut off power, and clean up the workplace.
Contact Us:
Shandong Longze Machinery Co.,Ltd
Company website:https://www.firemixer.com/
WhatsApp/Wechat:0086 13153609533
Tel:0086 13153609533
E-mail:rena@loneze.com
Address:Zhucheng Economic Development Zone, Shandong Province, the first five lines west
Contact:Ms. Rena
If you have any question you can contact me ,i can give you the lowest discount.
