Operation Instructions For Fully Automatic Industrial Electric Heating Food Cooking Mixer Machine
Cooking Mixer News /
10/22/2020
Operation instructions for fully automatic industrial electric heating food cooking mixer machine
Fully automatic industrial electric heating food cooking mixer machine is widely used in food processing such as candy (soft candy, hard candy), pastry, beverage, candied fruit, canned food, etc. It can also be used in large restaurants or canteens to boil soup, cook, roast meat, porridge, etc. It is an excellent food processing machinery and equipment for food processing to improve quality, shorten time and improve working conditions.
Characteristic:
The industrial electric heating food cooking mixer machine uses 380V power as the heat source, and the interlayer is equipped with electric heating rods, electric heating cooking mixer machine and heat conduction oil. The boiling point of the heat conduction oil can reach 3500C, which is controlled by the electric control box. Industrial food cooking mixer machine has the characteristics of large heating area, high thermal efficiency, uniform heating, short boiling time of liquid material, and easy control of heating temperature.
The inner pot (inner pot) of the industrial cooking mixer machine is made of acid-resistant and heat-resistant austenitic stainless steel, equipped with an electric control box. The automatic industrial food cooking mixer machine equipment is beautiful and easy to install, easy to operate, and reliable in insulation performance.
Maintenance and maintenance of industrial electric heating cooking mixer machine:
1. Oil leakage in the oil inlet pipe and outlet pipe joints. When tightening the nut does not solve the problem, add or connect packing.
2. The pressure gauge and safety valve should be checked regularly, and if there is any malfunction, it should be repaired or repaired immediately.
3. After 50 hours of use, the reducer should be disassembled to drain the lubricating oil, rinsed with kerosene diesel, and added 30#-40# clean oil. After 150 hours of use, change the oil for the second time, depending on the specific situation. Change the oil every 1000 hours of use.
4. The anti-rust paint should be painted in time, and the paint of the outer pot should be applied in time. X55-3 aluminum powder vinyl water-resistant paint is recommended.
5. After the electric heating cooking mixer machine has been used for 5 years, it is recommended to conduct a safety water pressure test, and 1.5 times the use pressure test when the pressure inside the interlayer is tested. According to the requirements of local security departments.
6. The outer body of the electric heating cooking mixer machine is made of 4.5-5.5mm thick stainless steel steel plate SUS304 or SUS316 or A3 steel plate. When the outer pot has been reduced to less than 2 mm after years of corrosion, it should be stopped.
7. The welding of stainless steel in the electric heating cooking mixer machine and the welding between stainless steel and other steel materials should use stainless steel welding rods stinky 102, 107, 132, and 137. Other grades should not be used.
8. There are two types of stirring structures for electric heating cooking mixer machines, one is ordinary stirring structure, and the other is stirring while scraping. The scraping material is made of polytetrafluoroethylene.
Precautions for the use of electric heating cooking mixer machine:
1. First, check whether the power supply is connected properly and whether there is any leakage. When operating, wipe your hands dry and do not bring water to prevent electric shock.
2. In the process of using the electric heating cooking mixer machine, you should always pay attention to the temperature change of the heat transfer oil, and the heat transfer oil should not exceed 2500C. (Controlled by the electric control box), timely and pay attention to high-speed temperature.
3. After the electric heating cooking mixer machine heats the materials to the required temperature, the materials are discharged from the bottom of the wok.
4. Before using this industrial food cooking mixer machine equipment in each shift, oil should be added to each rotating part; pay attention to whether the electric heating rod is damaged. For the stirring type jacketed pot, it is recommended to use edible oil for the parts on the surface of the pot; 30#-40# mechanical oil is used everywhere else.
5. During use, the vent hole should not be blocked, otherwise accidents may occur if the oil temperature is too high. The vent hole should be blocked first when the tilting electric heating cooking mixer machine is discharged to prevent the hot oil from overflowing and hurting people.
6. After use, the power should be cut off first, and tap water should be added to the pot immediately to protect the electric heating rod and prolong the service life.
Fully automatic industrial electric heating food cooking mixer machine is widely used in food processing such as candy (soft candy, hard candy), pastry, beverage, candied fruit, canned food, etc. It can also be used in large restaurants or canteens to boil soup, cook, roast meat, porridge, etc. It is an excellent food processing machinery and equipment for food processing to improve quality, shorten time and improve working conditions.
Characteristic:
The industrial electric heating food cooking mixer machine uses 380V power as the heat source, and the interlayer is equipped with electric heating rods, electric heating cooking mixer machine and heat conduction oil. The boiling point of the heat conduction oil can reach 3500C, which is controlled by the electric control box. Industrial food cooking mixer machine has the characteristics of large heating area, high thermal efficiency, uniform heating, short boiling time of liquid material, and easy control of heating temperature.
The inner pot (inner pot) of the industrial cooking mixer machine is made of acid-resistant and heat-resistant austenitic stainless steel, equipped with an electric control box. The automatic industrial food cooking mixer machine equipment is beautiful and easy to install, easy to operate, and reliable in insulation performance.
Maintenance and maintenance of industrial electric heating cooking mixer machine:
1. Oil leakage in the oil inlet pipe and outlet pipe joints. When tightening the nut does not solve the problem, add or connect packing.
2. The pressure gauge and safety valve should be checked regularly, and if there is any malfunction, it should be repaired or repaired immediately.
3. After 50 hours of use, the reducer should be disassembled to drain the lubricating oil, rinsed with kerosene diesel, and added 30#-40# clean oil. After 150 hours of use, change the oil for the second time, depending on the specific situation. Change the oil every 1000 hours of use.
4. The anti-rust paint should be painted in time, and the paint of the outer pot should be applied in time. X55-3 aluminum powder vinyl water-resistant paint is recommended.
5. After the electric heating cooking mixer machine has been used for 5 years, it is recommended to conduct a safety water pressure test, and 1.5 times the use pressure test when the pressure inside the interlayer is tested. According to the requirements of local security departments.
6. The outer body of the electric heating cooking mixer machine is made of 4.5-5.5mm thick stainless steel steel plate SUS304 or SUS316 or A3 steel plate. When the outer pot has been reduced to less than 2 mm after years of corrosion, it should be stopped.
7. The welding of stainless steel in the electric heating cooking mixer machine and the welding between stainless steel and other steel materials should use stainless steel welding rods stinky 102, 107, 132, and 137. Other grades should not be used.
8. There are two types of stirring structures for electric heating cooking mixer machines, one is ordinary stirring structure, and the other is stirring while scraping. The scraping material is made of polytetrafluoroethylene.
Precautions for the use of electric heating cooking mixer machine:
1. First, check whether the power supply is connected properly and whether there is any leakage. When operating, wipe your hands dry and do not bring water to prevent electric shock.
2. In the process of using the electric heating cooking mixer machine, you should always pay attention to the temperature change of the heat transfer oil, and the heat transfer oil should not exceed 2500C. (Controlled by the electric control box), timely and pay attention to high-speed temperature.
3. After the electric heating cooking mixer machine heats the materials to the required temperature, the materials are discharged from the bottom of the wok.
4. Before using this industrial food cooking mixer machine equipment in each shift, oil should be added to each rotating part; pay attention to whether the electric heating rod is damaged. For the stirring type jacketed pot, it is recommended to use edible oil for the parts on the surface of the pot; 30#-40# mechanical oil is used everywhere else.
5. During use, the vent hole should not be blocked, otherwise accidents may occur if the oil temperature is too high. The vent hole should be blocked first when the tilting electric heating cooking mixer machine is discharged to prevent the hot oil from overflowing and hurting people.
6. After use, the power should be cut off first, and tap water should be added to the pot immediately to protect the electric heating rod and prolong the service life.
Contact Us:
Shandong Longze Machinery Co.,Ltd
Company website:https://www.firemixer.com/
WhatsApp/Wechat:+86 13153609533
Tel:+86 13153609533
E-mail:longzemachinery2@gmail.com
Address:Zhucheng Economic Development Zone, Shandong Province, the first five lines west
Contact:Ms. Rena
